Vergleiche die Preise für Millionen von Produkten mit AliStore und seiner einzigartigen visuellen Suchmaschine.

  • YATO PROFESSIONAL GAS SOLDERING IRON, HOT AIR GUN, TORCH BUTANE GAS YT-36704

YATO PROFESSIONAL GAS SOLDERING IRON, HOT AIR GUN, TORCH BUTANE GAS YT-36704

  • 99,00€
  • Netto 99,00€
  • Artikelnr.
  • Verfügbarkeit Lagernd

Buy

PROPERTIES OF THE TOOL The gas burner has been designed for soldering, heating or drying. Since it is fed with propane and butane cartridges, it is possible to operate the tool where there is no source of electric energy. Compact dimensions and low weight permit a comfortable and safe operation.   ACCESSORIES The tool is delivered complete and does not require assembly. The tool is supplied with an empty gas tank. TECHNICAL PARAMETERS Parameter Unit of measurement Value Catalogue number - YT-36704 Types of gas - butane, propane-butane Flame temperature [OC] 1300 Nominal flux [g/h] 4,4 Heat load [W] 30 - 70 Weight (with an empty gas tank) [g] 50 Work with the tool Make sure there is no gas leakage, and then turn the handwheel of the regulator towards the symbol „+”. Set the value in the middle of the operating range. Move the switch to ON, and then press and hold the magneto lock pressed, and press the magneto (II). The internal lighting tool will light gas at the gas burner nozzle. Adjust the height of the flame with the gas regulator. The tool may be used both as a gas burner and as a soldering tool or a hot air gun. In case of its being used as a gas burner, it is required to dismantle the plastic ring fixing the tip of the soldering tool along with the base and the guard of the gas burner. Then install only the guard of the burner . In case the device is applied as a soldering tool, it is required to install the guard of the burner, the base of the tip and the soldering tip, with the plastic ring. In case the device is used as a hot air gun, proceed as in the case of soldering tool, but the tip must be dismantled from the base. Turning the gas burner off Turn the switch OFF. and then the gas flow is cut off and the flame is put out. Leave the tool on the support to cool down. 

+ Bewertung

Hinweis: HTML ist nicht verfügbar!
    Weniger Gut           Gut
Drones (2) | James McAvoy | 2: Advanced Technologies, Systems, and Applications II: Proceedings of the International Symposium on Innovative and Interdisciplinary Applications of ... 1st ed. 2018 Edition 2018